HALCYON TRAVELER(TM) BC SYSTEM
$599.00

TRAVELER(tm) BC SYSTEM 599.00
SINGLE TANK
INCLUDES:
Traveler(tm) BC: 30-lb (14-kg) lift capacity
Nylon backplate
Integrated Cinch(tm) Quick-Adjust Harness
Deluxe Harness Pads: shoulder and backplate

Our SMS 100 Sidemount system was designed not just with the sidemount cave divers in mind, but any diver. Whether you are a beginner, advanced or technical diver, this kit was designed for you. Suitable for sidemounting twin or single cylinders, but also for use with rebreathers or rear mounted singles. This "go anywhere" system can be used in any environment from open water to the overhead environment. Ready to dive out of the box.

Hollis has become a leader in the sidemount market. It is not just a fad and not just a tool for cavers, it is here to stay and is growing. The SMS 75 is an evolution from years of sidemount development, which started with the SMS 100. A product that has been copied, modified and a benchmark for technical sidemount for years. Even more popular has been the lightweight SMS 50 line. These two have taken sidemount mainstream and the building blocks this new harness. While it will cater more to hardcore cave divers, SMS 75 was created to handle all environments. Proper trim is key and the wing is designed to promote horizontal diving with increased lift towards the hips where it is needed most, and without modification. The SMS 75 will also support rear mounted tanks and reversible inflator positions.

Aluminum Back Plate
Red metallic or Flat Tech Black Finish w/HOG laser etched logo

Specifications:
Size: 26cm wide x 40cm long x 6cm deep
Weight: 1 lb 9.6oz / .726kg

Stainless Steel Back Plate
316 Stainless Steel
Bead blasted Silver Finish w/HOG laser etched logo

Specifications:
Size: 26cm wide x 40cm long x 6cm deep
Weight: 4 lbs 12.8oz / 2.177kg

Dive Rite's stainless steel XT backplate is one of the few backplates that is made in the USA. All Dive Rite backplates are laser cut and individually finished by hand. This attention to detail ensures that there will be no rough, jagged edges that could potentially damage harness or accessory webbing. The XT backplate uses an 11 gauge, low carbon and rust resistant 316L grade stainless steel. Weighing in at 5.2 lbs (2.4kg), stainless steel plates are a popular option for divers looking for a more even distribution of ballast weight.

The XT backplate is set up with 11 inch (27.9cm) on center mounting holes to accommodate standard double tank bolt kits, including two holes for the upper bolt to give user adjustability of tank height. Two sets of 2 inch slots along the center allow divers to use the backplate for single tank diving without the need for a single tank adapter. A series of slots and holes along the outer edges of the backplate provide different options for mounting lights, pony bottles, lift bags, and other accessories. 2 inch (50mm) and 1 inch (25mm) slots at the bottom center of the plate allow for any crotch strap up to 2 inch (50mm) in width to be used. Made in the USA.

Tank strap mounting slots options.
HOG logo laser etched Trivalent Chrome plated 316 Stainless Steel
Attachment bolts and hardware included

Specifications
Size: 23cm wide x 38cm long x 2.5cm deep
Weight: 15oz / .425kg

Diverite Quick Release Deluxe Harness
$44.95

A webbing harness designed for hard backplates that provides comfort and streamlining. Swivel points on the shoulder straps ensure a comfortable fit, which is especially important for women, as well as men with broad shoulders. A chest strap keeps the harness securely in place. Two-inch (50mm) nylon webbing provides strength, yet is soft and won't dig into the body. Harness is adjustable by cutting off excess webbing once diver has sized the harness to his body stature. Standard two-inch webbing allows for customization with a wide variety of pockets and accessories, depending on the needs and desires of the individual diver. Tubular webbing sleeves are included for all points where webbing will come into contact with the backplate to prevent abrasion. Includes marine-grade stainless steel hardware. Has a quick release on the left side front. Made in the U.S.A.

1 inch Crotch Strap
$7.95

Preferred by most divers for its general comfort, the 1-inch crotch strap is ideal for fastening a harness and backplate securely to a diver's body. By using a crotch strap, divers can reduce the likelihood of their gear slipping upwards on the body in the water, resulting in the tank hitting the back of the head during a dive. Nylon webbing provides strength, yet is soft and won't dig into the body. The 1-inch (25mm) crotch strap comes with a slide release buckle and scooter ring for divers who scooter and want the convenience of a crotch strap that can be adjusted easily. Made in the U.S.A.

2 inch Crotch Strap
$17.95

Preferred by divers who use scooters (DPVs) for extended periods of time due to the added comfort the 2-inch width provides. Used for fastening a harness and backplate securely to a diver's body, the 2-inch crotch strap is used to reduce the likelihood of gear slipping upwards on the body in the water, resulting in the tank hitting the back of the head during a dive. Continuous piece of nylon webbing provides strength, yet is soft and won't dig into the body. Includes a neoprene sleeve to protect exposure suit from abrasion. Made in the U.S.A.